Lumagen Radiance Mini-3D User Manual

RadianceMini-3D™ Video Processor Owner’s Manual

Section 1 – Getting Started Radiance Mini rev 091211 2 Document Conventions and Menu Navigation Commands are selected with the supplied inf

Section 2 – Overview Radiance Mini rev 091211 3 Section 2 – Overview Front Panel The front panel has a light-emitting-diode (LED) indic

Section 2 – Overview Radiance Mini rev 091211 4 Remote Control Power / Standby ON Power On STBY Standby Navigation Control CLR Clea

Section 2 – Overview Radiance Mini rev 091211 5 Block Diagram The function of the Radiance is to act as a video switch, process the select

Section 2 – Overview Radiance Mini rev 091211 6 Configuration Memories To understand how the Radiance functions, it is important to note t

Section 3 – Quick Start Guide Radiance Mini rev 091211 7 Section 3 – Quick Start Guide Installation Instructions 1. Install two AAA batteri

Section 3 – Quick Start Guide Radiance Mini rev 091211 8 System Configuration Examples The most common configurations using the Radiance Mini

Section 4 – Basic Commands Radiance Mini rev 091211 9 Section 4 – Basic Commands Power Turn power on by pressing the ON button, on t

Section 4 – Basic Commands Radiance Mini rev 091211 10Status Screen Pressing “OK” when the menu is off displays an on-screen information mess

Section 5 – Video Configuration Radiance Mini rev 091211 11Section 5 – Video Configuration By default the output is set to “Auto” The select

ROHS © 2009-11 Lumagen®, Inc. 503-574-2211 14025 SW Farmington Road Suite 280 Beaverton, OR 97005-2513 U.S.A. www.lum

Section 5 – Video Configuration Radiance Mini rev 091211 12Custom Modes Menu The Custom Modes store settings for the timing of HDMI video mod

Section 5 – Video Configuration Radiance Mini rev 091211 13Black Level Used to set the black level for the display. Normally the “Brightness”

Section 5 – Video Configuration Radiance Mini rev 091211 14or MENU → Output → Styles → [Style] → Aspect Ratio → (Single output aspect, Output

Section 5 – Video Configuration Radiance Mini rev 091211 15HDMI Level This command specifies if the HDMI inputs use video levels or PC levels

Section 5 – Video Configuration Radiance Mini rev 091211 16Input Picture Controls Black and White Levels To set the input’s black-level

Section 5 – Video Configuration Radiance Mini rev 091211 17Use the Crop TopLeft command to select the top-left-most active input pixel. Use t

Section 5 – Video Configuration Radiance Mini rev 091211 18Input Control Menu Deinterlacing Mode The default deinterlacing mode is “Auto.”

Section 5 – Video Configuration Radiance Mini rev 091211 19Noise Reduction Mosquito noise and block artifact noise are both seen in

Section 6 – Audio Configuration Radiance Mini rev 091211 20Section 6 – Audio Configuration The Radiance supports the HDMI 1.4 audio formats. This

Section 6 – Audio Configuration Radiance Mini rev 091211 21Audio Menu Navigation You can change the setting for any item in the Audio

Limited one (1) year warranty on Lumagen, Inc. products. Lumagen, Inc. (“Lumagen”) warrants (the “Warranty”) only to the original retail purchaser (“Y

Section 7 – Calibration Radiance Mini rev 091211 22Section 7 - Calibration Your theater system needs to be calibrated. To brighten the

Section 7 – Calibration Radiance Mini rev 091211 23• Check your results with a realistic image. Some displays can be adjusted so that the 96 IRE

Section 7 – Calibration Radiance Mini rev 091211 24• The Gamma Factor adjusts the gamma of the video output up or down. Since the Radi

Section 7 – Calibration Radiance Mini rev 091211 25• Set the Lumagen input aspect ratio as 4:3 (1.33) for a 4:3 screen, 16:9 (1.76) for a 16:9 s

Section 8 – Miscellaneous Commands Radiance Mini rev 091211 26Section 8 – Miscellaneous Commands System Settings Menu Mode The menu mode contr

Section 8 – Miscellaneous Commands Radiance Mini rev 091211 27On/Off Message A programmable string can be sent to another device via the RS-232 c

Section 8 – Miscellaneous Commands Radiance Mini rev 091211 28Zoom Step This command sets the size of the Zoom step to 5% or 15%. The command is:

Section 9 – 3D Support Radiance Mini rev 091211 29Section 9 – 3D Support The Radiance supports HDMI 1.4 “3D”. This includes 3D video source swit

Section 9 – 3D Support Radiance Mini rev 091211 30Separate Left and Right The Radiance can accept HDMI 1.4 “3D” video and output either the left-

Section 9 – 3D Support Radiance Mini rev 091211 313D EDID Configuration By default the display’s 3D capability is automatically detected using it

Section 9 – 3D Support Radiance Mini rev 091211 32Setup for Non-Compliant Video Sources The Radiance also has settings to display 3D video using

Section 10 – Command Interface Radiance Mini rev 091211 33Section 10 – Command Interface Direct Commands Direct Commands are entered by using the

Section 11 – Specifications Radiance Mini rev 091211 34Section 11 – Specifications Input • 2 video/audio HDMI® 1.4 inputs: o 480i to 1080p60,

LEGAL NOTICES: TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL LUMAGEN, ITS SUPPLIERS, OR ITS DEALERS, BE HELD LIABLE FOR INJURY TO PERSONS O

Table of Contents SECTION 1 – INTRODUCTION...

Table of Contents INPUT PICTURE CONTROLS...

Table of Contents LED Setup.........

Section 1 – Getting Started Radiance Mini rev 091211 1 Section 1 – Introduction Thank you for purchasing a Lumagen® Radiance™ video processor. Th